time travel

The main aim of this CTC Construct, scale model prototype is to test a hypothetical design (I discovered by accident), for a device or construct to generate closed timelike curves. The CTC Construct is a scale model prototype for a full-sized manned prototype, known as the Flight Test Article (FTA): Defiance. The FTA: Defiance is an 12ft by 12ft by 6ft, prototype Vertical Take-Off and Landing (VTOL) aerosplace vehicle, which has taken nearly six years to design. The design for the CTC Construct and FTA Defiance, was largely inspired by the work carried by Thomas Townsend Brown and Nikola Tesla. I have combined their work with quantum theory and the principles of electrostatics and tribo-electrification, to product a vehicle, unlike any other, (See figure one).

figure 1
I orginally planned to begin construction on the FTA in the summer of 2001. But this date maybe put back until the winter of 2001, due to numerous construction problems.
It would be almost impossible for anyone to build a time machine, as it would require an extremely powerful energy source to drive it. But there maybe a more energy efficient way to travel through time, by building a device or construct to use a natural time machine like a quantum or astrological phenomanon, in the form of a worm hole or quantum singulary.
The CTC Construct model consists of two triangular shaped pyramids one placed on top of the other, with a smaller pyramid placed on top to create an apex above the model’s centre of gravity. (see figure 2). The model is 2ft by 2ft by 1ft. The frame is made out of balsa wood, and has 3 coats of polyurethane varnish, plus 3 coats of high temperature heat resistant paint to protect the balsa wood frame from igniting.